Hello,

We have a SCM system on HANA DB with embedded Livecache.

LCApps and HANA are on the same version 1.00.097 and LCApps also initialized.

SCM Release is 713 SP 10.

In LC10 and DBACOCKPIT, the connections LCA, LDA and LEA exist and show green.

DB connection also shows green.

However, we are seeing multiple issues with regards to Livecache connectivity.

1) In DB59, there is no entry displayed.

2) In DBCONUSR, there is no entry visible.

3) /SAPAPO/OM17 consistency check gives error "Connection to livecache failed".

4) LCA03 also showing some errors:

At least on liveCache-table is not Row Store. Run program

/SAPAPO/OM_CREATE_LC_TABLES. If the problem is not solved contact SAP.

Ran this program but the error still exists.

Please help.

Thanks,

Arpit

Hello,

I am trying to create a new SCM quality system by making a copy of production system using backup/restore. I am a basis person and this is my first time working on SCM system. Please note that we want to copy both SCM database and also the data in livecache database. The SIDs for both SCM and Live cache instance are changing. I have read multiple notes (1015489, 886103, 877203, 457425, 1030857, 1349272 etc) and some GREAT POSTS in this forum BY NATALIA KHLOPINA. Thanks to this info, I have done the following so far:

SCM version is 7.0 SP 11 and Livecache version is 7.7.7.

I first copied over the SCM database using backup restore.

Installed the SCM target system with the new SID

Installed Livecache instance for target system (on a separate host than SCM) using swpm

Then I initialized the maxdb instance via DB manager

then I did restore and initialize using the full backup that I had taken of source livecache system via DBM GUI (pretty much steps in note 457425)

Then ran the following command : load_systab -u superdba,admin

(ran into some issues in between but resolved one by one like upgrading kernel, re-restored the db afer change default_code to Unicode etc )

Then in LC10, LCA -  I registered LCAPPS

Then in LC10, I did the integration configuration for LCA connection (it was blank due to some reason after the copy). Also reentered the u/p for LDA and LEA connections.

The LC10 connections are coming up green to livecache

Firstly, can you verify the steps above are correct so far ?

Secondly, I am trying to follow the notes 1015489, 886103, 877203, 457425 and 1030857, 1073954 to do post copy steps and have the following issues/questions:

1) In note 1015489 (connection problems after system copy),  it says to run report SLCA_GET_SYSNAME to get system name in livecache. When I do so, It says "Table for system names does not yet exist". Is that normal ( I am on scm 7.0 SP11) ? If I go to dbmcli and try to drop table APPSYSPARAM or APPSYSNAME, it says table does not exist ?? How do I verify if correct system name is registered in livecache?

2) Note 886103 (system landscape copy for SCM) -- It says to change logical system name in /SAPAPO/ORDMAP but this table is not active in my dictionary !! same for table CIFRFCDES and table /sapapo/cifdistr does not exist ??

3) Note 886103 says that if you want to rename the user SAPR3 to SAPEL1, you run some dbmcli commands. Is this necessary ?? my Livecache id is changing from LIP to LIQ, so shall I change it ? The domain.users currently shows control , superdba and also SAPLIP user and SAPLIQ user (SAPLIQ user only started showing up after I registered LC APPS ). Do I need to do anything else or verify something ?

4) Note 877203 once again talks about SAPEL1 user and I am not sure if I need to run these steps or not

5) Note 1030857 tells to run this report zz_update_acckey to correct the external keys. Is this necessary even if we run BDLS ? Shall I ask the SCM functional person ?

6) Note 1073954 (effects of changing the standard livecache user) -- How do I know if I need to run this ? my livecache tables like /sapapo/ordmap are stil owned by SAP<OLDSID> but  in LC10 connections I have changed the three connections to use SAP<NEWSID> user and the connetions are green and connection tests in db59 are also successful !!.

The note says that "Only change the standard liveCache user if the system does not contain any data or if you initialize the liveCache directly after the change"

My copied over livecache does contain data and If I initialize the livecache after changing this user id, I guess I will loose the data. So, Can I skip this step as long as connections in LC10 and db59 are working okay ?

7 ) How can I verify that APO optimizer is also installed in Production system. I thought it was optional to install it and I don't know if this client is using it ?

Sorry for this long long post. Hope someone out there has patience to clarify my doubts.

Thanks

BV

We have applied Support Pack 09 to SCM 7.01 System. My question is do we need to apply latest patch for LiveCache as well. If yes where can I find the details. I checked PAM but it was not helpful or I was missing something. I have attached ST22 dump file.

Source: SCM 7.01 SP08

Source Live Cache: 7.7.07   BUILD 040-123-244-640

Target: SCM 7.01 SP09

We have not applied any patched to LiveCache.

/n/sapapo/om17 --> Consistency Check LiveCache - APO DB --> Execute; It throws Runtime Error.

Check Done so far:

LC10 --> Able to start, stop LiveCache

DB59 --> All good

Thanks in advance.

hi,

Is there any change in the way we start/stop livecache using LC10 transaction? In earlier releases (7.6) LC10 used to invoke /sapdb/<SID>/db/sap/lcinit script to start the live Cache. Is it changed in 7.7 or higher?

Regards,

Venkat

Dear Experts,

We facing a liveCache error in our System.

Everytime we start in tx DB02 the liveCache error "liveCache lock server not accessible" appears.

I also check transaction LC10 and found a warning that "SQL access not possible"

Here is the Connection Test Log i made:

Application Server:  MDCSAP07_AP1_00                          ( Windows NT )

   1. Connect. test with "dbmcli db_state"                         Successful

   2. Connect. test with command mode "dbmrfc db_state"            Successful

   3. Connect. test with session mode "dbmrfc db_state"            Successful

   4. Connect. test with "native SQL"  ( LCA )                     No connection

      SQL Code:

      Error creating a secondary database connection

      Set up of a secondary connection to the database system failed. It is possible that the data required for setting up the con

      SQL code:

      For detailed information, see the developer trace for work process:           25

Here's the copy of the dev_25:

Thu Jul 25 13:57:46 2013
    OCIAttrSet(con=0, rc ln: 0 31, -1 32, 0 3, 0 8) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48

Thu Jul 25 13:57:49 2013
    OCIAttrSet(con=0, rc ln: 0 20, -1 32, 0 3, 0 8) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48
    OCIAttrSet(con=0, rc ln: 0 20, -1 32, 0 2, 0 8) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48
    OCIAttrSet(con=0, rc ln: 0 20, -1 32, 0 2, 0 8) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48
    OCIAttrSet(con=0, rc ln: -1 37, 0 22, 0 4, 0 10) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_CLIENT_INFO is greater than the maximum allowable length of 64
    OCIAttrSet(con=0, rc ln: -1 37, 0 22, 0 4, 0 10) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_CLIENT_INFO is greater than the maximum allowable length of 64
    OCIAttrSet(con=0, rc ln: -1 37, 0 22, 0 4, 0 10) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_CLIENT_INFO is greater than the maximum allowable length of 64
    OCIAttrSet(con=0, rc ln: -1 37, 0 22, 0 4, 0 10) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_CLIENT_INFO is greater than the maximum allowable length of 64

Thu Jul 25 13:57:50 2013
    OCIAttrSet(con=0, rc ln: 0 22, -1 27, 0 4, 0 12) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48
    OCIAttrSet(con=0, rc ln: 0 22, -1 27, 0 4, 0 12) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48
    OCIAttrSet(con=0, rc ln: 0 22, -1 27, 0 4, 0 12) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48
    OCIAttrSet(con=0, rc ln: 0 22, -1 27, 0 4, 0 12) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48

Thu Jul 25 13:57:51 2013
    OCIAttrSet(con=0, rc ln: 0 22, -1 27, 0 4, 0 12) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48
    OCIAttrSet(con=0, rc ln: 0 22, -1 27, 0 4, 0 12) failed with SQL error 24960:
    ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48

Thu Jul 25 13:57:54 2013

Thu Jul 25 13:57:54 2013
     OCIAttrSet(con=0, rc ln: 0 20, -1 32, 0 2, 0 8) failed with SQL error 24960:
     ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48

Thu Jul 25 13:57:57 2013
     OCIAttrSet(con=0, rc ln: 0 27, -1 32, 0 3, 0 8) failed with SQL error 24960:
     ORA-24960: the attribute  OCI_ATTR_MODULE is greater than the maximum allowable length of 48
  Loading DB library 'C:\usr\sap\AP1\DVEBMGS00\exe\dbsdbslib.dll' ...
  *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("C:\usr\sap\AP1\DVEBMGS00\exe\dbsdbslib.dll")
Error 126 = "The specified module could not be found." [dlnt.c       255]
  {root-id=0015C58921771ED2BD9D22A0E0973991}_{conn-id=00000000000000000000000000000000}_0
  *** ERROR => Couldn't load library 'C:\usr\sap\AP1\DVEBMGS00\exe\dbsdbslib.dll'
[dbcon.c      5672]
  {root-id=0015C58921771ED2BD9D22A0E0973991}_{conn-id=00000000000000000000000000000000}_0
  ***LOG BYG=> could not load library for database connection LCA        [dbds         862]
  ***LOG BZY=> unexpected return code 8192       calling DBDS       [dbacds       1536]

Hi,

We are testing migration of SCM to SCM on HANA with integrated LiveCache in our lab box & now migrating

external LiveCache to Integrated LiveCahce migration.We have done all the steps upto step 5 as specified in the note 1825703. Not able to validate step number 6. We dont see APS_ORDER_GET_DATA under "Catalog => Public Synonyms" in the SAP HANA Studio and also we dont see role AFL__SYS_AFL_LCAPPS_EXECUTE. The LC installation step number 5 completed successfully without any error. The HANA DB connection (created in step 4) from DBACOCKPIT is working fine LCA,LDA and LEA.

Thanks

Vipin

Hello,

i am trying to restore a created backup.

But i can´t restore the logs.

initial situation:

debian squeeze databaseserver with 2.6.32-5-amd64 kernel.

maxdb 7.7.07

I have set the backups to:

- sunday full backup

- daily diff backup

- 10 min interval logs

the connection to database:

>dbmcli -uUTL -d %DATABASE% -u %user%,%passwd%

>db_admin

config of my backup

>medium_getall

AUTOLOG /var/maxdb/autolog/autolog FILE AUTO 0 8 NO NO 20100823092642 20100823092642 NONE 0

FULL1 /var/maxdb/full/full01 FILE DATA 0 8 YES NO 20120516122927 20120516122927 NONE 0

DIFF11 /var/maxdb/diff/diff11 FILE PAGES 0 8 YES NO 20120516122956 20120516122956 NONE 0

DIFF12 /var/maxdb/diff/diff12 FILE PAGES 0 8 YES NO 20120516122956 20120516122956 NONE 0

DIFF13 /var/maxdb/diff/diff13 FILE PAGES 0 8 YES NO 20120516122956 20120516122956 NONE 0

DIFF14 /var/maxdb/diff/diff14 FILE PAGES 0 8 YES NO 20120516122956 20120516122956 NONE 0

DIFF15 /var/maxdb/diff/diff15 FILE PAGES 0 8 YES NO 20120516122956 20120516122956 NONE 0

DIFF16 /var/maxdb/diff/diff16 FILE PAGES 0 8 YES NO 20120516122956 20120516122956 NONE 0

do the restore:

>db_activate RECOVER FULL1

successful and all changed data available

>recover_start DIFF11

successful and all changed data available

now i should restore the logs.

but i got a lot of errors.

i would like to have the data of the following log "/var/maxdb/autolog/autolog.007"

i had already try these statements:

>recover_start AUTOLOG LOG 007

>recover_replace AUTOLOG /var/maxdb/autolog/autolog.007

which statement should i use?

how can i restore the logs?

Hello,

I´m in LC10 transaction and I don´t have the button for initializa the livecache. I can only see the but start/stop/register LCApps.

I´ve the role SAP_BC_LVC_SUPERUSER. What can I do for view this button in this tcode?

Which is the function of Register LCApps button?

Any suggestion?

Thanks a lot.

Hi,

I have installed SCM 7.0 EHP1.

Also Installed Live Cache Server (Not Installed Client Software)

Please check the attached screenshot.

I am getting "DBM Access is Possible - NO" Error.

SAPDB_DBM and SAPDB_DBM_DAEMON RFCs are Failing.

Live Cache Client software need to install ??? (SCM and Live Cache are there in same host)

Need to copy any files into SCM Kernel ???

Pls provide SAPDB_DBM and SAPDB_DBM_DAEMON RFC properties.

-------------------------------------------------

[root@cgiu1104a bin]# ./dbmcli inst_enum

OK

7.7.07.10    /sapdb/IDL/db

[root@cgiu1104a bin]#

---------------------------------------------

Following Max DB Processes are running -

[root@cgiu1104a bin]# ps -ef |grep sdb

root     23112 10844  0 17:14 pts/1    00:00:00 grep sdb

sdb      27161     1  0 14:36 pts/0    00:00:00 /sapdb/programs/pgm/vserver start

sdb      27162 27161  0 14:36 pts/0    00:00:00 xserver.prt logger

sdb      27753     1  0 14:36 ?        00:00:00 /sapdb/IDL/db/pgm/kernel IDL -diagpipe 14

sdb      27758 27753  0 14:36 ?        00:00:14 /sapdb/IDL/db/pgm/kernel IDL -diagpipe 14

[root@cgiu1104a bin]#

-----------------------------------------------------------

RFC Trace -

**** Trace file opened at 20160403 170412 EDT, by disp+work

**** Versions SAP-REL 722,0,101 RFC-VER U 3 1656744 MT-SL

======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

Transaction program not registered

ABAP Programm: SAPLSADC (Transaction: )

User: DDIC (Client: 800)

Destination: SAPDB_DBM_DAEMON (Handle: 2, DtConId: 570122E564B30B77E10000000A0002CE, DtConCnt: 0, ConvId: ,)

EPP RootContextId: 0A1FC68A527F1EE5BEBBAB9DB9AFD293, ConnectionId: 5701137664B00B75E10000000A0002CE, ConnectionCnt: 1

EPP TransactionId: 5701222264B30B77E10000000A0002CE

SERVER> RFC Server Session (handle: 1, 20696474, {57011376-64B0-0B75-E100-00000A0002CE})

SERVER> Caller host:

SERVER> Caller transaction code: DB59 (Caller Program: SAPLSADC)

SERVER> Called function module: DBM_CONNECT_PUR

Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1732

CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

Transaction program not registered

DEST =SAPDB_DBM_DAEMON

HOST =%%RFCSERVER%%

PROG =dbmrfc@sapdb

cgiu1104a:id3adm 65>

---------------------------------------------------

stderr logs

/sapdb/programs/bin/dbmrfc: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory

/sapdb/programs/bin/dbmrfc: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory

/sapdb/programs/bin/dbmrfc: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory

-------------------------------------------

WP Logs -

M Sun Apr  3 17:25:39 2016

M  ***LOG R49=> ThReceive, CPIC-Error (020456) [thxxhead.c   8134]

M  ***LOG R5A=> ThReceive, CPIC-Error (21998193) [thxxhead.c   8139]

M  ***LOG R64=> ThReceive, CPIC-Error ( CMSEND(SAP)) [thxxhead.c   8144]

A  RFC 3730  CONVID 21998193

A   * CMRC=20 DATA=1 STATUS=1 SAPRC=456 ThSAPCMRCV

A  RFC> ABAP Programm: SAPLSADC (Transaction: DB59)

A  RFC> User: DDIC (Client: 800)

A  RFC> Destination: SAPDB_DBM (handle: 25, DtConId: 570114DA64B00B75E10000000A0002CE, DtConCnt: 1, ConvId: 21998193,{570114DB-64B0-0B75-E100-00000A0002CE})

A  RFC> Called function module: DBM_VERSION

A  *** ERROR => RFC ======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456

Timeout during connection setup (check that partner exists)

[abrfcio.c    9225]

A  {root-id=0A1FC68A527F1EE5BEBBAB9DB9AFD293}_{conn-id=00000000000000000000000000000000}_0

A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3732

CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456

Timeout during connection setup (check that partner exists)

[abrfcio.c    9225]

A  {root-id=0A1FC68A527F1EE5BEBBAB9DB9AFD293}_{conn-id=00000000000000000000000000000000}_0

A  *** ERROR => RFC Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1984

[abrfcio.c    9225]

A  {root-id=0A1FC68A527F1EE5BEBBAB9DB9AFD293}_{conn-id=00000000000000000000000000000000}_0

I am trying to perform the SAP SCM migration from AnyDB to HANA DB.

During the import configuration I get the below error popup.

"AFL__SYS_AFL_LCAPPS_EXECUTE , AFL Role does not exist. This role is automatically created during the installation of SAP liveCache Applications (SAP LCA). Proceed with the installation of SAP liveCache Applications following the description in the guide 'Installation and Upgrade Information SAP HANA Installation Guide with Unified Installer', chapter 'Installing SAP liveCache Applications (SAP LCA) on a SAP HANA System'. This guide is available on SAP Service Marketplace at http://help.sap.com/hana_appliance,under 'Installation and Upgrade Information SAP HANA Installation Guide with Unified Installer'. "

I have deployed the LCAPP LiveCache component as described in the SAP HANA GUIDE " SAP HANA Update and Configuration Guide"

Steps :

1. 1.Open the SAP HANA lifecycle manager user interface.
2. 2.Choose Add LiveCache Applications (LCApps).
3. 3.Specify the required entries by following the instructions in the wizard.

I am unable to overcome this issue and go ahead with the integrated LiveCache scenario.

Current HANA DB Version : 1,0 SP06 Rev 66

LCAPP component deployed  : IMDB_LCAPPS100_70_1-20010426

Kindly let me know how i could resolve this issue and proceed with the system migration.

Hi Experts,

We are planning to do SCM 7.0 EHP2 upgrade from SCM 7.0.

I have few questions regarding upgrade of SCM and Livecache 7.7 to 7.9 .

1. Is it possible to upgrade the SCM alone with out livecache upgrade .Or is it mandatory to upgrade livecache too with SCM upgrade .

2. Whether livecache should be upgraded before or after SCM 7.02 upgrade .

3.how to do Parallel upgrade of SCM and Livecache . things to do for parallel upgrade .

4. Which upgrade is best , Livecache upgrade after SCM upgrade or parallel upgrade of Livecache and SCM.

5.As per upgrade guide there are two method for livecache upgrade one is extract/load & another is inplace upgrade, which one we need to follow.

Please help me to clarify this things .

Thanks

Alok

Hi,

Sorry, a bit new to livecache and MaxDB

I have problem starting up livecache from LC10. However, I can stop from LC10. Also, I can not start/stop it from Database Manager Studio.

Only manage to start/stop from dbmcli command line.

Below is the lcinit.log file

more /sapdb/data/wrk/CSV/lcinit.log

************************ START *****************************

liveCache CSV (restart)

20.11.2015

03:25

------------------------------------------------------------

Installation path is /sapdb/CSV/db

Operating system is SunOS

The liveCache state is OFFLINE

DBMServer 7.7.07   Build 045-123-247-303

Starting CSV into ADMIN

ERR

-24994,ERR_RTE: Runtime environment error

20089,Check knldiag! Kernel died before reaching ADMIN state:20

ERROR : liveCache CSV not started

------------------------------------------------------------

20.11.2015

03:25

************************* END ******************************

I've been reading and most discussion mentioned to increase resource limit, and I have increased the file descriptor limit from 4096 to 65536 for user SIDadm. However, it still failed to start. Am I doing this correctly? Do I need to give a higher value

ulimit -a

time(seconds) unlimited

file(blocks) unlimited

data(kbytes) unlimited

stack(kbytes) 10240

coredump(blocks) unlimited

nofiles(descriptors) 65536

memory(kbytes) unlimited

Hi Gurus,

I am getting below issue while during upgrade of Live cache from 7.7 to 7.9 version, below is the command I am running from the Upgrade guide

LCUPDATE.BAT -s <SAPSID> –d <liveCache name> -u <DBM,DBM password>

& while running the command on window server I got below error:

ERROR: The usage parameter db_name is not set.

USAGE: LCUPDATE [options]

[options] for the SAP liveCache server upgrade:

        -s       sap_name         (SAP system name)

        -d       db_name          (SAP liveCache name)

        -u       dbm,dbmpasswd    (DBM user authorization)

[options] for the SAP liveCache client upgrade:

        -s       sap_name         (SAP system name)

        -client                   (client software upgrade)

[options] optional:

        -dir     tmp_directory    (temporary working directory)

Could you please help on the same. I have already upgraded SCM 7.0 EHP1 to EHP2.

Regards

Bhupender

Hi Experts,

We are performing SCM Upgrade from 5.1 to 7.0 EHP3.

In Execution Step, we have been asked to Upgrade the Live Cache and perform Section C Steps of Report /SAPAPO/OM_LC_UPGRADE_70.

LiveCache has been upgraded successfully to, LCA Build 100.28 PL 002 with Kernel 7.9.8.35.

After that, we are performing Steps Under Section C.

C1 and C2 are completed successfully.

During Step C3, Load Mater Data,

we get an error message "Jobs for creating

Master Data are Faulty".

When we checked the background jobs, a background job,

RESOURCE_LC_CLIENT_300, fails below message:

Job started

Step 001 started (program

/SAPAPO/RESOURCES_LC_CREATE, variant &0000000000010, user ID DDIC)

Prepare data

Create Resources

Create Resources with setup matrix

Wrap Up

Error creating resources in liveCache

Check the spool

Error occurred while creating resources inliveCache

Job cancelled after system exception

ERROR_MESSAGE

In Spool we only find below information, no other information.

Below are the spool entries:

Data statistics Number of

Records passed 61

Can any one suggest what can done to eliminate this error.

Thanks and Regards,

PC

Hello,

We are considering to upgrade OS and database of our APO systems - both APO and LC run on the same host. Following is scenario. Could you please suggest what version of live cache we need to be running while we migrate to Windows 2012 and SQL 2012.

Source:

SAP SCM 5.0

Windows Server 2003

SQL Server 2005

Livecache 7.6.00.29 

Target:

SAP SCM 5.0

Windows Server 2012 R2

SQL Server 2012 SP2

Livecache ????

I have checked PAM and according to it livecache 7.6.00.29 is only supported until Windows Sever 2008.

Thanks

Hello World,

after a somewhat messy upgrade to SP14 on our SCM5.0 system (in preparation to the final upgrade to SCM7),  we can't connect to our LiveCAche no more.

The only reason why I am keeping this thread open is that now the short dumps are gone, but the system won't connect to the LiveCache no more.

Calling LC10 results in the following error (after being stuck a while trying to retrieve version info):

>DBM_EXECUTE

>dbm_version

>command timeout exceeded

We can start and stop the LC DB just fine via dbmcli.

Here is the enum info:

dbmcli -U c db_enum

OK

APP /sapdb/APP/db                           7.6.00.36 fast running

APP /sapdb/APP/db                           7.6.00.36 quick offline

APP /sapdb/APP/db                           7.6.00.36 slow offline

APP /sapdb/APP/db                           7.6.00.36 test offline

LCP /sapdb/LCP/db                           7.6.02.08 fast running

LCP /sapdb/LCP/db                           7.6.02.08 quick offline

LCP /sapdb/LCP/db                           7.6.02.08 slow offline

LCP /sapdb/LCP/db                           7.6.02.08 test offline

APP -> APO SCM5.0 Production

LCP -> LiveCache AddOn

I sure as heck didn't touch the LC database, so why is it now acting like its no longer in talkative mode?

Any help with this is highly appreciated.

PS: The box runs on Linux SLES12

Hi,

A newbie question. I'm getting the following error when starting livecache. Please help

more lcinit.log

************************ START *****************************

liveCache SID (restart)

25.11.2015

03:41

------------------------------------------------------------

Installation path is /sapdb/SID/db

Operating system is SunOS

The liveCache state is OFFLINE

DBMServer 7.7.07   Build 045-123-247-303

Starting SID into ADMIN

Starting SID into ONLINE

Creating liveCache application procedures

ERR

-24964,ERR_EXECUTE: error in program execution

65280,/sapdb/SID/db/bin/sdbsysload -R /sapdb/SID/db -d SID -u superdba,*

 

 

----------Command----------------

USE USER superdba *  SERVERDB "SID"

-----------Error-----------------

ERR

-25005

User (SUPERDBA) logon to database SID failed: SQL error -4008 = Unknown user name/password combination (error position: 1)

 

 

---------------------------------

 

 

MaxDB Installer Runtime Error:

perl runtime error:

Can't call method "loaderCmd" on an undefined value at installib.pm line 574.

ERROR : liveCache SID not started

------------------------------------------------------------

25.11.2015

03:42

************************* END ******************************

Hello Guru's,

We are facing issue in starting Live cache , due to some maintainance activity we had to stop live cache and SCM system. But after restarting SAP system we are not able to start the livecache from LC10. Start and stop tabs are greyed out and hence doesnt allow to start livecache. We are getting below errors in LC10, we have already stopped the running Maxdb processes at OS level and renamed .SHI and .SHM files in the work directory but issue still persists.Could you please let me know if anybody has faced such issue before and how it was resolved.

We are running on live cache 7.9.08.10.

Exception CX_DBA_ADBC in class CL_SDB_ADBC method DBM_EXECUTE line 82 / RC=ADBC error

Exception CX_DBA_ADBC in class CL_SDB_ADBC method DBM_EXECUTE line 82 / RC=ADBC error

SQL not possible

SQL Error: 10709

Connection failed (RTE:[5] database not running)

DBM not possible

Error when calling function module DBM_EXECUTE_SDB

Command:                                dbm_version

Function            : DBM_EXECUTE

Command             : dbm_version

Error               : DBM Error

Return Code         :         0

Regards

Prashant

Hello,

Are there any restriction about install Livecache server and SCM on the same server?

The OS is windows.

Regards.

Hi Experts,

Can anyone please tell me how to use live cache in Ms Sql Database....Is it possible to use live cache in Ms sql if so, It will be very helpful for me if you send any documents or links.

Thanks in advance...

Regards,
Krishna.M